How to write a C Program Turns on an LED on for one second, then off for one second, repeatedly in C Programming Language ?
Solution For C Program :
[code]
/*
Blink
Turns on an LED on for one second, then off for one second, repeatedly.
Most Arduinos have an on-board LED you can control. On the Uno and Leonardo, it is attached to digital pin 13. If you're unsure what pin the on-board LED is connected to on your Arduino model, check the documentation at http://www.arduino.cc
This example code is in the public domain.
modified 8 May 2014
by Scott Fitzgerald
*/
// the setup function runs once when you press reset or power the board
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
[/code]
Learn More :
Arduino
- C Program Arduino Serial PIN control for Relay
- C Program to Demonstrates changing the keypad size and key values.
- C Program Duino Starter nRF24L01 Transmit JoyStick
- C Program : 4x4 Matrix Keypad connected to Arduino. This code prints the key pressed on the keypad to the serial port.
- Programa C para controlar una matriz de 8x8 de LEDs para mostrar una serie de 0-9
- Arduino Intro C Program
- C Program to Arduino rest [Mac/IP del shield]